Five Airbrush Car Paint Techniques for a Professional Coat

January 27, 2012

Any custom paint job on a vehicle will typically make use of a variety of airbrush car paint techniques. Unlike a standard painting method, where solid colors are swathed across the entire vehicle or a large section of the vehicle, airbrush car paint sprayer technique involves a much gentler and more minimal approach. Still, there are a few very important techniques to keep in mind to get a professional looking coat of paint on your car after you've used an airbrush. Read on for some tips on how to use a paint sprayer to help define the exterior of your vehicle.

Number 1 -- Make Sure the Airbrush Works Properly First

The first and most important step to successfully airbrushing your vehicle is to set up the airbrush properly first. Make sure that it works and test it out before you begin to protect the coat of your car from damaging mistakes. Read the instructions on the airbrush kit to set it up correctly and be sure the air compressor that is used to feed air through the nozzle of the airbrush is working right. Test out the paint first on a piece of paper or, if available, a piece of scrap metal.

Number 2 -- Practice Makes Perfect

If you've never used an airbrush to paint your car before, it's a good idea to spend a significant amount of time practicing various airbrush techniques before you begin. Secure a piece of scrap metal and practice making short, even strokes, both vertically and horizontally. When you're satisfied with your ability to create a clear line, begin gradually expanding the length of those lines and bending them into different shapes.

Number 3 -- Use Short Strokes

It's easiest to create a professional airbrush effect if you use short, even strokes when painting your car. Do not attempt to hold down the airbrush trigger for more than a split second, as this makes it more difficult to control the flow of the paint.

Number 4 -- Paint Darker Colors First

Paint with darker colors first so you can go back in and cover up any mistakes you make with lighter colored paints later on. This helps to protect your car from poor looking paint jobs.

Number 5 -- Allow Plenty of Time to Dry

Be sure to allow the paint you use in your airbrush technique plenty of time to dry on your car. Do not smudge it or rub it with your finger or a rag, as this will cause the paint to run and become uneven. Allow at least 24 hours for the paint to dry completely before you attempt to touch it.

Airbrush tools and paint can be found at custom auto body shops and car service shops all around the country. Ask a professional for additional advice if you're in need, and don't be afraid to take your time with the project.

Privacy Policy|Terms of Use|Cookie Policy|Disclaimer
COPYRIGHT 1999-2019 MH Sub I, LLC dba